industrialgaq.blogg.se - Sheetcam updates

#Sheetcam updates install
#Sheetcam updates update
#Sheetcam updates driver
#Sheetcam updates code

The Code Snippets should now appear in your Tools Window. The asterisks and pluses were added to the comment lines above to make it easier to see them in the GCode. Make sure that you are using Output#4 for AD2, otherwise edit the Tool Code so that the outputs match your P#. Click on "Menu ->Tools -> Code" Add the two following Code snippets - but don't include the quotes:Ĭode Name: "THC Inhibited via AD2" Actual Code Snippet: "M63P4 (***THC Inhibited, AD2***)"Ĭode Name: "THC Allowed via AD2" Actual Code Snippet: "M62P4 (+++THC Allowed, AD2+++)" This will also provide the rules for THC Inhibited and THC Allowed

This will provide you with two code tools (shown in step 3b) that you will need for the rules in the next step to work. Open SheetCam and click on "Menu ->File -> Open Job Template" and select this file. Download the file ( you may need to right click on the link and click "Save link as"). If you DON'T have a tool table, here is a Default WarpRunner v003.jobt template file to use. Only do step 3a or do both steps 3b and 3c.

#Sheetcam updates update

This step is required for the post processor to update SheetCam correctly. P3 is for Output#3, P27 is for Output#27, etc. While still in the "Post Processor" tab, click on "Edit Post", Find the two lines:Ĭhange the P3 to match the output number you have selected for your torch relay.

WarpRunner Mach4 v002.scpost Version 002 added GCode comments to make it easier to see where the Torch is turning on and off, along with when a Probe/Reference is happening (as shown in 2b below).

This has been modified so that you specify the "Pierce Drop to Fire Torch" which will bring you down to pierce height.

WarpRunner Mach4 v003.scpost Version 003.

This changed a G04 P0.001 delay to P0.0011 so that it would not be skipped by Mach4 as being to short of a delay (a single millisecond).

WarpRunner Mach4 v004.scpost Version 004.

This added a small incremental move in the Z, in case the Tool settings specified a Pause at the end of a cut.

WarpRunner Mach4 v005.scpost Version 005.

Open SheetCam, then go to "Menu -> Options -> Machine"Ĭlick on the "Post Processor" tab, and then at the bottom click on "Import Post", select this file (after you have downloaded to your machine - you may need to right click on the link and click "Save link as") It takes about 90 seconds to recreate the rules from the screen shots below if you choose to go with the Stable branch.Ģ. Either Development or Stable will work, but only Development will allow you to import the rules.

#Sheetcam updates install

Execute run-scanything to run Scanything.SheetCam Setup and Usage Guide for the WarpRunner in Mach4 with the ESSĭownload and install SheetCam TNG Stable or Development from here. The data folder in the zip is a tarball containing everything you need to run Scanything. If that does not work you can simply unzip the file. You can now simply double click on the file to install Scanything.

Go to the permissions tab and make sure 'execute' is turned on. To install it, download the file then right-click on it an select 'properties'.

#Sheetcam updates driver

It is possible to work with other versions but you would have to build the driver and LinuxCNC from source. NOTE: this will currently only work out of the box with LinuxCNC V2.7.5 - v2.7.14. home/sheetcam/public_html/Scanything/Downloads/Scanything.txt

Windows 2000 users may need to install Windows 2000 update rollup 1 first. If you are installing on a computer without Internet access, the installer may ask you to install this Microsoft update: vcredist_x86_vc2009.exe.